http://www.kobakant.at/DIY Thu, 02 Sep 2010 08:43:28 +0000 http://backend.userland.com/rss092 en I have recently ordered sparkfun conductive fabric (MedTex180), which is similar to LessEMF stretchy fabric but much thicker and stiffer. The structure of the fabric is more like a rib than Lycra. The front side is very shiny and you can see the rib structure from the back side. ... http://www.kobakant.at/DIY/?p=2789 Here is the second version of Solar T-Shirt with components directly sewn on with conductive thread. It is also using slightly different circuit than the other solar t-shirt. The new schematic is the following. Please not that it is using FLED (Blinking LED) instead of diode on ... http://www.kobakant.at/DIY/?p=2763 Instructables is having a soft circuit contest... Link >> http://www.instructables.com/id/Soft-Circuit-Contest/ http://www.kobakant.at/DIY/?p=2759 16+17th August 2010, DIS Conference, Aarhus, Denmark 9 participants, 2 days >> Workshop Website http://www.kobakant.at/DIY/?p=2752 >> A bit about the Teensy >> Mouse in a Hole - an example project using the Teensy >> Download Illustrator file Remove paper backing from conductive fabric that you want to fuse. Line-up conductive fabric with base fabric. Check to see the light through the holes. Iron and remove excess. Bend over tabs and fuse ... http://www.kobakant.at/DIY/?p=2672 Use the Teensy board to fake Human Interface Device (HID) input. Human interface devices are recognized by your computer without need for drivers or custom software. They include computer mice, keyboards and joysticks. You can program the Teensy using Arduino!!! Also see: >> Sewable fabric break-out board for the Teensy >> Example: Mouse ... http://www.kobakant.at/DIY/?p=2497