Example Projects
Workshops
Announcements
Actuators
Connections
Power
Sensors
Traces
Circuits and Code Wireless
Meet the Materials
Conductive Materials
Non-Conductive Materials
Tools
Techniques
Thinking Out Loud
Connections
  • Beaded Multi-wire
  • Body to Breadboard Bracelet
  • Breakout Boards
  • Cardwoven USB Cable
  • Chaining Components
  • Common GND
  • Custom Plugs
  • DIY USB
  • E-Textile Cheat Sheet
  • Elastic Waistband with Motor Pouches
  • Electroplating Conductive Farbrics
  • Spaghettimonster
  • Lasercut Fabric Breakout
  • fabric button circuit
  • Felted DIP socket
  • Flux Test
  • Hard to Soft Snap Connection
  • Hard/Soft Connections
  • Improved Electrical Contact
  • Lulu as 4-Way Adapter
  • Making Connections
  • Pivoting 3-Way Connection
  • Snap Breakouts
  • Soldering Conductive Fabric
  • Soldering Conductive Thread
  • Super Stretchy & Robust Conductor
  • Weaving Multiconductor Bands
  • Wire to Conductive Fabric Connection
    • Support the creation of content on this website through PATREON!
  • About
  • E-Textile Events
  • E-Textile Spaces
  • Newsletter
  • Print & Publications
  • E-Textile Shopping

    • SEARCH
    Content by Mika Satomi and Hannah Perner-Wilson
    E-Textile Tailor Shop by KOBAKANT
    The following institutions have funded our research and supported our work:

    Since 2020, Hannah is guest professor of the Spiel&&Objekt Master's program at the University of Performing Arts Ernst Busch in Berlin

    From 2013-2015 Mika was a guest professor at the eLab at Kunsthochschule Berlin-Weissensee

    From July - December 2013 Hannah was a researcher at the UdK's Design Research Lab

    From 2010-2012 Mika was a guest researcher in the Smart Textiles Design Lab at The Swedish School of Textiles

    From 2009 - 2011 Hannah was a graduate student in the MIT Media Lab's High-Low Tech research group led by Leah Buechley


    In 2009 Hannah and Mika were both research fellows at the Distance Lab


    Between 2003 - 2009 Hannah and Mika were both students at Interface Cultures
    We support the Open Source Hardware movement. All our own designs published on this website are released under the Free Cultural Works definition
    Connections

    Soldering Conductive Fabric

    also see: Materials >> Conductive Fabrics
    Of the conductive fabrics I tried soldering to, only the copper FlecTron fabric distributed by LessEMF was very reliable. There was another silver fabric that worked, but I don’t know the source. The Laird conductive fabric tape was also good, so were copper mesh and copper foil tape with conductive adhesive.


    6 Comments so far

    1. Samuel Otis on August 11th, 2011

      Hi,

      What method did you employed to solder on conductive fabrics?

      Thanks

    2. admin on August 11th, 2011

      i soldered to the conductive fabrics with a regular soldering iron. most of the conductive fabrics are metalized synthetics so they will melt at high temperatures. use the soldering iron carefully and apply flux to help the solder flow.

    3. admin on August 11th, 2011

      some conductive fabrics (plug and wear) and threads (karl grimm) are made from very fine metal. these are much easier to solder to, and the connections are much more robust.

    4. Samuel Otis on August 11th, 2011

      Thanks a lot!

    5. Ralph on November 1st, 2011

      Hi, I’m looking for a conductive material that is very stretchable, like elastic, and can have small wire leads soldered to it robustly. This will be used on a garment product that flexes considerably. Any suggestions?

    6. admin on November 1st, 2011

      the Shieldex stretch conductive fabric from LessEMF if very stretchy and pretty conductive:
      >> http://www.kobakant.at/DIY/?p=376

      for additional stretch you can cut the fabric as demonstrated here by Nadya:
      http://www.kobakant.at/DIY/?p=1300

    Leave a comment