Example Projects
Workshops
Announcements
Actuators
Connections
Power
Sensors
Traces
Circuits and Code Wireless
Meet the Materials
Conductive Materials
Non-Conductive Materials
Tools
Techniques
Thinking Out Loud
Traces
  • Etching Flex Circuits
  • Lasercut Fabric Circuits and Traces
  • Fabric Ribbon Cable
  • Printed Copper Traces
  • Isolating Traces
  • Knit Breadboard Circuit
  • knitted stretchy cable
  • Laser- and Vinylcut Solder Masks
  • Machine-Sewing Solderable Traces
  • Machine-sewn Neopixel Strip
  • Non-Stretchy Traces
  • Plated Fabric Traces
  • Plotted Flex PCB
  • Screen-printed Copper Paint on Fabric
  • Circuit Sewing Tips
  • Stretch Conductors
  • stretchy cable
  • Stretchy Traces
  • Vinylcut Copper & Fabric PCB
  • Washability Tests
    • Support the creation of content on this website through PATREON!
  • About
  • E-Textile Events
  • E-Textile Spaces
  • Newsletter
  • Print & Publications
  • E-Textile Shopping

    • SEARCH
    Content by Mika Satomi and Hannah Perner-Wilson
    E-Textile Tailor Shop by KOBAKANT
    The following institutions have funded our research and supported our work:

    Since 2020, Hannah is guest professor of the Spiel&&Objekt Master's program at the University of Performing Arts Ernst Busch in Berlin

    From 2013-2015 Mika was a guest professor at the eLab at Kunsthochschule Berlin-Weissensee

    From July - December 2013 Hannah was a researcher at the UdK's Design Research Lab

    From 2010-2012 Mika was a guest researcher in the Smart Textiles Design Lab at The Swedish School of Textiles

    From 2009 - 2011 Hannah was a graduate student in the MIT Media Lab's High-Low Tech research group led by Leah Buechley


    In 2009 Hannah and Mika were both research fellows at the Distance Lab


    Between 2003 - 2009 Hannah and Mika were both students at Interface Cultures
    We support the Open Source Hardware movement. All our own designs published on this website are released under the Free Cultural Works definition

    Etching Flex Circuits

    You can design, print and etch your own PCBs from a flexible sheet of Kapton coated with a thin layer of copper. To do this yourself you need some special materials and equipment, and if you are not planning on etching circuits more regularly then it can be nice to start by looking for a […]

    LilyPad Arduino Programming

    Saturday May 25th 11-18:00, Open Tech School workshop at Coop Berlin This workshop is more of a tutoring session for up to 3 participants per tutor and aims to be a super quick and basic introduction to programming an Arduino LilyPad, as well as personalized help building specific projects or getting started.

    Arduino meets Wearables Workshop

    Thursday 9th May 2013, codemotion, Berlin Arduino meets Wearables: What can your clothing do for you?

    Openwear Finger Bend Sensor

    This project uses the Openwear open design for gLove Mono by Zoe Romano and integrates a felt & Velostat bend sensor on the middle finger. A LilyPad Arduino is programmed to read the analog sensor value of the fabric bend sensor, and trigger 1, 2 or 3 LED lights to light up depending on how […]

    Voodoo Sensor

    Also: poke sensor, pin prick sensor, prick sensor, sting sensor… Two layers of conductive fabric with isolating spacer in between.

    eTextile Summer Camp 2013

    The eTextiles Summer Camp 2013 Call for eTextiles Practitioners! The eTextiles Summer Camp (eTextile-summercamp.org) is a five day event that brings together expert practitioners of eTextiles and Soft Circuitry in one place to share their knowledge and skills through hands-on workshops, and facilitate discussions around their practices. We are looking for makers, designers, engineers and […]