ohmTranslator
This credit-card size flex circuit translates the resistance between two probes into the resistor colour code. Conveniently the resistor colour code chart can be mounted just bellow the LEDs so that you don’t actually have to remember it for this tool to be useful. This version is a first prototype and with through-hole components not […]
Wrist-Flick-Sensor
Made during PIFcamp 2017, this textile sensor detects the impact of a conductive pendulum slapping against the wristband when the wrist is twisted back and forth in a flicking action. The conductive pendulum is made from a small heavy stone collected by the Soca river that has been sewn into a stretch conductive pouch.
Sonic Insoles for Magic Shoes
These Sonic Insoles demonstrate a simple way of adding pressure sensors in your shoes. Fusing strips of conductive fabric to the surface of a robust base material such as felt. Cutting shapes of piezoresistive fabric for the pressure sensitive areas. Punching holes for sewing and using thick thread to hold everything together.
Wire to Conductive Fabric Connection
in progress… Inspired by Vaclav’s Magic Shoe connections… Poke wires through strips of conductive fabric and soldered them to stripy protoboard. Solder quickly at low heat to avoid that the heat of the soldering will melt the stretch conductive fabric and burn the conductive layer of silver.
Textile Sensor Demos for Summer School
These textile sensor demos were made for the Soft Circuits for Soft Bodies workshop at the eTextile Summer School 2017.
E-Textile Cheat Sheet
— work in progress — Making electrical connections and not making electrical connections are the most common challenges when working with electronic textiles. This chart lists a variety of materials and ways of making connections (making contact) and not making connections (insulating) between them.